 |
|||
|
|
|||
|
Page Title:
OPERATING THE PERSONNEL DOOR - continued |
|
||
| ||||||||||
|
|
 TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0005 00
OPERATION UNDER USUAL CONDITIONS
Using the Door Stop/Hold Open Device. The door stop/ hold open device (1) is a pivoting bar located
on the outside of the personnel door (2). It is used to secure the personnel door in an open position.
To use the door stop/hold open device, pull the hairpin cotter (3) on the right bracket (4) of the device and
remove the clevis pin (5). The hairpin cotter (3) is attached to the arm by means of a lanyard (6).
Swing the arm (1) to the left and open the personnel door (2) until the hole (7) at the end of the arm (1) is
aligned with the hole (8) in the bracket (9) mounted to the left of the personnel door (1).
Install the clevis pin (5) through the holes (7, 8) in the arm and the bracket. Install the hairpin cotter (3) in
the clevis pin (5).
To release the door stop/hold open device and allow the personnel door to close, simply reverse the
above procedure.
6
1
5
Personnel door closed,
4
door stop/hold open
device in stowed
3
position
2
4
1
5
7
Personnel door open; door
stop/hold open device in
8
deployed position
9
3
2
0005 00-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version