LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS

TM 9-2320-391-10

M1078A1 SERIES PREVENTIVE MAINTENANCE

0087 00

CHECKS AND SERVICES (PMCS) - Continued

LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS - Continued

WARNING

Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear

protective goggles and gloves; use only in well-ventilated area;

avoid contact with skin, eyes, and clothes; and do not breath

vapors. Keep away from heat or flame. Never smoke when using Dry

Cleaning Solvent; the flashpoint for Type l Dry Cleaning Solvent is

100 F (38 C) and 138 F ( 50 C). Failure to comply may result in

serious injury or death to personnel.

If personnel become dizzy while using Dry Cleaning Solvent

(P-D-680), immediately get fresh air and medical help. If Dry

Cleaning Solvent contacts skin or clothes, flush with cold water. If

Dry Cleaning Solvent contacts eyes, immediately flush eyes with

water and get medical attention. Failure to comply may result in

serious injury or death to personnel.

Cleaning Fittings Before Lubrication. Clean parts with Dry Cleaning Solvent (SD ll, P-

D-680) or equivalent. Dry before lubricating. Dashed arrows indicate lubrication on both

sides of equipment.

Lubrication After Fording. If a fording operation occurs, lubricate all fittings below

fording depth and check submerged gear boxes for presence of water.

Lubrication After High-Pressure Washing. After a through washing, lubricate all

grease fittings and oil can points outside and underneath vehicle.

Lubrication Local Views. A reference to the appropriate localized view is given after

most lubrication entries.

Corrosion Control

Refer to WP 0001 00 for appropriate corrosion control procedures.

0087 00-5