 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-391-10
OPERATION IN SAND OR MUD - Continued
0043 00
VEHICLE OPERATION - Continued
WARNING
Do not straddle or drive on sides of sand mounds. Loose sand will
not support vehicle on steep slopes. Avoid driving diagonally across
a hill. Vehicle may roll over. Failure to comply may result in serious
injury or death to personnel or damage to equipment.
7.
Steer vehicle straight up and down hills when possible. When driving across a hill is
necessary, choose the lowest angle possible, keep vehicle moving, and avoid quick,
sharp turns.
8.
To move vehicle forward and turn after vehicle is stopped in loose sand or mud:
a.
Press MODE select button (2) on WTEC III TPSS (3).
b.
Press R (Reverse) select button (6) on WTEC III TPSS (3).
c.
Move vehicle straight back approximately 20 ft (6.1 m).
d.
Stop vehicle.
e.
Press D (Drive) select button (7) on WTEC III TPSS (3).
f.
Press higher gear select button (8) on WTEC III TPSS (3).
0043 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version