 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-391-10
OPERATION IN SAND OR MUD - Continued
0043 00
VEHICLE OPERATION - Continued
WARNING
Operating in water or mud causes brake linings to get wet and can
impair vehicle braking. Dry brakes by driving vehicle about 500 ft
(153 m) while applying service brakes often. If adequate braking is
not restored by drying brakes, notify Field Maintenance. Failure to
comply may result in serious injury to personnel or damage to
equipment.
2.
Push MODE select button (2) on WTEC III Transmission Pushbutton Shift Selector
(TPSS) (3) to select desired transmission gear.
3.
Accelerate slowly so tires do not spin and dig in sand or mud.
4.
Press lower gear range button (4) on WTEC III TPSS (3).
5.
Keep accelerator pedal (5) steady after vehicle reaches desired speed.
6.
Turn vehicle slowly when in loose sand or mud.
0043 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version