 |
|||
|
|
|||
|
Page Title:
FRONT WINCH EXTENSION REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
FIELD MAINTENANCE INSTRUCTIONS
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)
FRONT WINCH EXTENSION REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Applicable Models
Equipment Condition
All
Parking brake set and wheels chocked
(TM 9-2320-361-10).
Materials/Parts
Battery ground cable disconnected
(WP 0126 00).
Ten locknuts (item 147, WP 0470 00)
Front winch removed (WP 0345 00).
Brush guard removed (WP 0203 00).
REMOVAL
1.
Remove four locknuts (4) and screws (3) from bottom of frame rail (2). Discard locknuts (4).
2.
Remove six locknuts (5), screws (7), loop tiedown (1), and front winch extension (6) from frame
rail (2). Discard locknuts (5).
INSTALLATION
1.
Install front winch extension (6), and loop tiedown (1) on frame rail (2) with six screws (7) and new
locknuts (5). Do not tighten nuts (5).
2.
Install four screws (3) and new locknuts (4) through bottom of frame rail (2) and front winch
extension (6). Tighten nuts (4).
3.
Install brush guard (WP 0203 00).
4.
Install front winch (WP 0345 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
7
3
4
6
5
END OF WORK PACKAGE
0205 00-1/2 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version