Table 1. Preventive Maintenance Checks and Services (PMCS) - continued

TM 9-2320-361-24-1

0023 00

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) (Contd)

Table 1. Preventive Maintenance Checks and Services (PMCS) (Contd).

ITEM

ITEM TO CHECK/

EQUIPMENT NOT

INTERVAL

PROCEDURE

NO.

SERVICE

READY/AVAILABLE IF:

Semiannually Rear

a. Inspect torque rods (1) for damage and

a. Torque rod is

suspension

security. Tighten if loose or replace if

damaged or loose.

1. Place flat end of crowbar or pinch

bar between torque rod (1) and

mounting bracket (2).

2. Push on end of bar until hook end

moves 46 in. (101.6152.4 mm).

3. Release pressure on bar. If torque

rod (1) does not return to original

position, replace (WP 0162 00).

Semiannually

b. Inspect rear springs (3) for cracks,

b. Rear springs are

breaks, and security. If spring U-bolts

broken or loose.

(4) are loose, tighten 190220 lb-ft

(258298 Nm). If cracked or broken,

Semiannually

c. Inspect front and rear spring wear

pads (8) for wear. Replace wear pads

(8) if spring (3) is rubbing against

spring bracket (7) (WP 0161 00).

0023 00-14