On some taillight and stoplight assemblies, you will have
to use a flat-tip screwdriver to put in screws (1 and 2).
Put grommet (3) in light housing (4).
Using phillips screwdriver, screw in and tighten three screws (1).
Put socket assembly with wiring (5) on guides in light housing (4), alining
Using phillips screwdriver, screw in and tighten two screws (2) and two
Follow-on Maintenance Action Required:
Replace left taillight and stoplight lamps. Refer to
Replace left taillight and stoplight assembly. Refer
to para 7-28.
END OF TASK