7-25. TAILLIGHT AND STOPLIGHT ASSEMBLY (RIGHT SIDE ONLY) REMOVAL AND
REPLACEMENT (EARLY MODEL TRUCKS WITH TURN SIGNALS).
The blackout stoplight is mounted on top of
bracket on some trucks and on bottom of
bracket on other trucks. This task is for
truck M756A2. It can be used for other trucks.
Truck parked, engine off, handbrake set, main light
switch in OFF position.
a. Preliminary Procedure.
Remove blackout stoplight assembly. Refer to
Tag three electrical lead plugs (1) so they will be put
back the same way.
Unplug three electrical lead plugs (1) from wiring harness connectors (2).
Using 9/16-inch wrench, unscrew and take off two capscrews and lockwashers
(3), clamp (4), and ground wire (5).
Take off blackout stoplight bracket (6) and taillight and stoplight assembly (7)
END OF TASK