7-12. INSTRUMENT CLUSTER REMOVAL AND REPLACEMENT.
TOOLS: Flat-tip screwdriver
3/4-inch open end wrench
9/16-inch open end wrench
3/8-inch open end wrench (2)
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
a. Preliminary Procedure. Disconnect battery ground cable. Refer to para 7-58.
Tag all connectors so they can be put back
in the right place.
Using screwdriver, turn mounting studs (1) 1/4turn to the left.
Pull instrument cluster (2) about 2 inches away from the instrument panel (3).
GO TO FRAME 2