Quantcast Section III. THERMOSTAT

 

Click here to make tpub.com your Home Page

Page Title: Section III. THERMOSTAT
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
HOSES AND CLAMPS REMOVAL AND REPLACEMENT - continued - TM-9-2320-209-20-3-10390
Up
/.5ton/TM-9-2320-209-20-3-1 2-1/2-Ton 6x6 M44A1 and M44A2 Series Trucks (Multifuel) Truck Cargo: M35A1 M35A2 M35A2C M36A2 Manual
Next
THERMOSTAT  REMOVAL  AND  REPLACEMENT
TM 9-2320-209-20-3-1
Section III.
THERMOSTAT
6-6.  THERMOSTAT  REMOVAL  AND  REPLACEMENT.
TOOLS :  9/16-inch open end wrench (2)
Flat-tip screwdriver
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
SUPPLIES:
One
PERSONNEL:
Truck parked, engine off, handbrake set.
EQUIPMENT
CONDITION:
a.
Preliminary Procedures.
(1) Open hood and both side panels. Refer to TM 9-2320-209-10.
(2) Drain cooling system. Refer to para 6-10.
b.
Removal.
FRAME 1
1.
Using screwdriver, loosen two screws (1) on two clamps (2). Spread open
both clamps and take clamps off hose (3).
2.
Using two wrenches, unscrew nut (4) from bolt (5) and take nut off. Pull
bolt out of rod end clevis (6).
3.
Pull radiator (7) forward at top just enough to take off preformed hose ( 3).
GO TO FRAME 2
TA
085560

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.