6-5. HOSES AND CLAMPS REMOVAL AND
1/2-inch socket wrench
9/16-inch wrench (2)
Truck parked, engine off, handbrake set.
Cooling System Hoses and Clamps.
(a) Drain cooling system. Refer to para 6-10.
(b) Take off generator belts. Refer to para 6-9.
Using screwdriver, loosen two screws (1).
Slide two clamps (2) down on hose (3).
Using 9/16-inch wrenches, unscrew and take off locknut (4).
Pull bolt (5) out of rod end clevis (6).
Pull radiator (7) forward at top, just enough to take off hose (3).
Pull hose (3) off.
Take clamps (2) off hose.
GO TO FRAME 2