GENERAL INSTRUCTIONS - TM-9-6115-663-13-P0293

TM 9-6115-663-13&P

1. CRIMP CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-E-45782.

2. AT PIGTAIL END OF CABLE, THE FOUR 8 AWG GROUNDING CONDUCTORS SHALL BE TWISTED TOGETHER

STARTING AT THE JACKET. CONDUCTORS SHALL BE SOLDER COATED FOR A LENGTH OF .250 FROM END

USING SOLDER, FIND NO. 5.

3. AT PIGTAIL END OF CABLE, EACH INSULATED CONDUCTOR SHALL HAVE THEIR INDIVIDUAL STRANDS

TWISTED TOGETHER AND SOLDER COATED FOR A LENGTH OF .126 FROM END USING SOLDER, FIND NO. 6.

4. INSULATION COLORS, IN ACCORDANCE WITH WIRE TABLE, SHALL BE INCLUDED AS PART OF THE

ORDERING DATA.

5. HOT STAMP "97403-13229ES674-" AND W19" IN .23-.39 HIGH WHITE CHARACTERS ON INSULATION

SLEEVING, FIND NO. 3, IN ACCORDANCE WITH MIL-M-60903.

6. HOT STAMP TERMINAL DESIGNATION, AS SHOWN IN WIRE TABLE, USING .09-.16 HIGH BLACK

CHARACTERS, IN TWO PLACES (180" APART) ON INSULATION SLEEVING, FIND NO. 4, IN ACCORDANCE

Figure G-1. B Unit Cable Assembly W19 (Sheet 2).

G-3