SPECIAL INFORMATION. - TM-9-6115-663-13-P0202

TM 9-6115-663-13&P

F-42 PART NUMBER INDEX Part numbers in this index are listed by part number in ascending

alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places the first

letter or digit of each group in order A through Z, followed by the numbers 0 through 9 and each following

letter or digit in like order).

F-4.2.1 CAGEC column. The Commercial and Government entity Code (CAGEC) is used to identify the

manufacturer, distributor, or Government agency, etc., that supplies the item.

F-4.2.2 PART NUMBER column. Indicates the primary number used by the manufacturer (individual,

firm, corporation, or Government activity), which controls the design and characteristics of the item by

means of its engineering drawings, specifications, standards, and inspection requirements to identify an

item or range of items.

F-42.3 STOCK NUMBER column. This column lists the NSN for the associated part number and

manufacturer identified in the PART NUMBER and CAGEC columns to the left.

F-424 FIG. column. This column lists the number of the figure where the item is identified/located in

Section II and HI.

F-4.2.5 ITEM column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

F-43 FIGURE AND ITEM NUMBER INDEX.

F-4.3.1 FIG. Column. The column lists the number of the figure where the item is identified located in

Section II and III.

F-4.3.2 ITEM Column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

F-4.3.3 STOCK NUMBER Column. This column lists the NSN for the item.

F-4.3.4 CAGEC Column. The Commercial and Government Entity Code (CAGEC) is used to identify the

manufacturer, distributor, or Government agency, etc., that supplies the item.

F-4.3.5 PART NUMBER Column. Indicates the primary number used by the manufacturer (individual,

firm, corporation, or Government activity), which controls the design and characteristics of the item by

means of its engineering drawings, specifications, standards, and inspection requirements to identify an

item or range of items.

F-5 SPECIAL INFORMATION.

F-5.1 Usable on Code. The usable on code appears in the lower left comer of the DESCRIPTION AND

USABLE ON CODE (UOC) column heading. Usable on codes are shown as "UOC . . ." on the next line

below the last line of the applicable item description/nomenclature. The UOC entry begins at the left edge

of the column. Uncoded items are applicable to all models. Identification of the usable on codes used in

this publication are:

Used On

ETB

ANIMJQ-41

EWA

PU-805

EWB

PU-806

F-6 Change 1