Table 2-2. Operator Preventive Maintenance Checks and Services - continued

TM 9-6115-663-13&P

Table 2-2. Operator Preventive Maintenance Checks and Services

for AN/MJQ-41, PU-805, and PU-806 - continued

Location

Not Fully Mission

Item

Capable if:

Procedure

Item to Check/Service

No.

Interval

TRAILER-continued

b. Check adjustment of handbrake lever

Before

HANDBRAKE-continued

(1). Lever is properly adjusted when

it is difficult to move beyond two-

thirds of the way to the applied

position. If out of adjustment, see

step d.

c . With trailer hooked to towing

vehicle, set handbrake lever (1).

Move trailer slightly to see if

handbrakes hold wheels. If not,

proceed to step d.

d. Adjust handbrake as follows.

1. Release handbrake lever (1).

2. Turn adjustment knob (2) clockwise

to tighten or counterclockwise to

loosen. If unable to adjust, or if

adjustment has been used up, refer

to Unit Level Maintenance.

3. Check adjustment (Refer to step b).

Repeat steps 1 and 2 as required

Repeat step c.

2-10