|
|
TM 9-2320-391-10
PREPARATION FOR INTERNAL AIR TRANSPORT,
0052 00
HIGHWAY, OR RAIL SHIPMENT Continued
VAN BODY INSTALLATION - Continued
NOTE
Left and right van body mounting hardware is installed the same way. Left
side shown.
9. Install spring (13), stud (10), two washers (12), and slotted nuts (11) in subframe (8).
10. Install two lynch pins (9) in stud (10).
11. Install washer (7), bolt (4), washer (6), and slotted nut (5) in subframe (8).
12. Install lynch pin (3) in bolt (4).
13. Perform steps (9) through (12) on right side of van body.
0052 00-9
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |