ENGINE START IN COLD ENVIRONMENT - continued

TM 9-2320-391-10

VEHICLE OPERATION IN COLD ENVIRONMENT

0048 00

32 F TO -25 F (0 C to -32 C) - Continued

ENGINE START IN COLD ENVIRONMENT - Continued

28. Release starter pushbutton (26) when engine starts or after 30 seconds.

CAUTION

If STOP ENGINE indicator flashes (red) to warn Operator about a potential engine

failure, shut down engine (WP 0016 00) immediately and perform Engine System

Troubleshooting. Failure to comply may result in damage to equipment.

If OIL PRESS gage does not show engine oil engine oil pressure of 15-80 psi within

10-15 seconds after starting engine, shut down engine (WP 0016 00) immediately

and perform

NOTE

Oil pressure will increase when engine speed increases and will decrease when

engine speed decreases.

29. Check that OIL PRESS gage (28) reads between 15 psi and 80 psi. If OIL PRESS gage

reads in red zone and ENGINE OIL PRESSURE INDICATOR (29) is illuminated, shut

down engine (WP 0016 00) and perform Engine System Troubleshooting.

0048 00-14