 |
|||
|
|
|||
|
Page Title:
SELECT TRANSMISSION OPERATING RANGE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-391-10
VEHICLE OPERATION USUAL CONDITIONS
0016 00
(VEHICLE S/N 11,438 TO 18,549) - Continued
SELECT TRANSMISSION OPERATING RANGE - Continued
WARNING
Transmission incorporates a hold feature to prohibit upshifting
above selected operating range during normal driving. However,
during downhill operation, transmission may upshift above selected
operating range. On downgrades, vehicle speed may need to be
restricted by using service brakes. Failure to comply may result in
serious injury or death to personnel or damage to equipment.
4.
Press down arrow button (23) on WTEC III TPSS (21) to shift transmission to lower
operating range.
5.
Press up arrow button (24) on WTEC III TPSS (21) to shift transmission to higher
operating range.
CAUTION
If illumination of last selected operating range goes out, WTEC III ECU has
detected a problem that needs correcting. Do not attempt to shift
transmission to N (Neutral) or any other operating range. Operate vehicle at
reduced speed to a safe parking location. Failure to comply may result in
damage to equipment.
NOTE
Perform steps 6 through 9 if display window is not showing last selected
operating range.
6.
Stop vehicle (WP 0016 00).
0016 00-15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version