EXPLANATION OF COLUMNS IN THE REMARKS - TM-9-2320-386-24-1-20692

TM 9-2320-386-24-1-2

0391 00

NOTE

The "L" maintenance level is not included in column (4) of the

MAC. Functions to this level of maintenance are identified by a

work time figure in the "H" column of column (4), and an

associated reference code is used in the REMARKS column (6).

This code is keyed to the remarks and the SRA complete repair

application is explained there.

Column (5) Tools and Equipment Reference Code. Column (5) specifies, by code, those common tool

sets (not individual tools), common Test, Measurement and Diagnostic Equipment (TMDE), and special

tools, special TMDE, and special support equipment required to perform the designated function. Codes are

keyed to the entries in the tools and test equipment table.

Column (6) Remarks Code. When applicable this column contains a letter code, in alphabetic order,

which is keyed to the remarks table entries.

EXPLANATION OF COLUMNS IN THE TOOLS AND TEST EQUIPMENT REQUIREMENTS

Column (1) Tool or Test Equipment Reference Code. The tool and test equipment reference code

correlates with a code used in column (5) of the MAC.

Column (2) Maintenance Level. The lowest level of maintenance authorized to use the tool or test

equipment.

Column (3) Nomenclature. Name or identification of the tool or test equipment.

Column (4) National Stock Number (NSN). The NSN of the tool or test equipment.

Column (5) Tool Number. The manufacturer's part number, model number, or type number.

EXPLANATION OF COLUMNS IN THE REMARKS

Column (1) Remarks Code. The code recorded in column (6) of the MAC.

Column (2) Remarks. This column lists information pertinent to the maintenance function being

performed as indicated in the MAC.

END OF WORK PACKAGE

0391 00-3/4 blank