 |
|||
|
|
|||
|
Page Title:
PLANETARY GEARING MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0379 00
PLANETARY GEARING MAINTENANCE (Contd)
ASSEMBLY
NOTE
Apply lubricating oil to all transmission parts before assembling.
1.
Install bearing (20) on snapring groove end of output shaft (19).
2.
Install output shaft (19), with bearing (20), on rear planetary carrier (22) with retaining ring (18).
3.
Install rear sun gear (14) on main shaft (1) with retaining ring (17).
4.
Install center ring gear (13) on rear sun gear (14) and main shaft (1) with snapring (12).
5.
Install rear planetary carrier (22) in planetary drum (11) with snapring (21).
6.
Apply oil-soluble grease to needle bearing (15) and bearing race (16).
7.
Install bearing race (16) and needle bearing (15) on output shaft (19).
8.
Install main shaft (1), with center ring gear (13), in rear planetary carrier (22). Ensure splines of
rear sun gear (14) engage splines of rear planetary carrier (22).
9.
Install thrust washer (10), center planetary carrier (9), center sun gear (8), and front planetary ring
gear (23) in planetary drum (11) with snapring (7). Ensure carrier splines engage splines of
planetary drum (11).
10.
Install thrust washer (6) and front planetary carrier (5) on planetary drum (11).
11.
Install thrust washer (4), front sun gear (3), and thrust washer (2) on front planetary carrier (5).
INSTALLATION
1. Holding planetary gear unit (24) by main shaft (1), lower planetary gear unit (24) into
transmission (25). Ensure planetary gear unit (24) bottoms in transmission (25) and all teeth mesh.
2. Install governor drive gear (26), speedometer drive gear (27), and spacer (28) on output shaft (19).
3. Install bearing (29) and snapring (30) on transmission (25).
4. Install center support (WP 0378 00).
5. Install transmission governor (WP 0369 00).
6. Install transmission output oil seal (WP 0382 00).
0379 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version