 |
|||
|
|
|||
|
Page Title:
FOURTH CLUTCH MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0376 00
FOURTH CLUTCH MAINTENANCE (Contd)
10.
Using compression tool, press spring retainer (10) until it clears snapring groove in fourth clutch
housing (7).
11.
Install snapring (11) on fourth clutch housing (7) and remove compression tool.
12.
Install five external-tanged clutch plates (4) and internal-splined clutch plates (3) on piston (6).
Begin with external-tanged clutch plate (4).
13.
Install backplate (2) on fourth clutch housing (7) with snapring (1.3).
INSTALLATION
NOTE
Fourth clutch assembly will bottom out on third clutch assembly.
1. Install fourth clutch assembly (12) with open side of housing facing up in transmission (13).
2. Install forward clutch and turbine shaft (WP 0375 00).
3. Using clutch pack clearance gauge, check clearance between snapring (1.3) and backplate (2). Small
end of clutch pack clearance gauge should fit in clearance. If clearance is excessive, replace clutch
plates (3) and (4). If clearance is insufficient, replace with thinner backplate (2).
CLUTCH PACK
CLEARANCE
GAUGE
12
1.3
2
3
4
3
4
4
12
3
11
4
10
5
6
9
8
13
7
END OF WORK PACKAGE
0376 00-5/6 blank
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version