FORWARD CLUTCH AND TURBINE SHAFT MAINTENANCE - continued

TM 9-2320-386-24-1-2

0375 00

FORWARD CLUTCH AND TURBINE SHAFT MAINTENANCE (Contd)

10.

Place supports (6) under PTO gear (1) and position clutch housing (4) with shaft facing downward.

11.

Locate gap (2) in snapring (3) through cutout in clutch housing (4).

12.

Insert a small screwdriver through cutout in clutch housing (4), nearest to gap (2) in snapring (3),

and press snapring (3) into groove of clutch housing (4).

NOTE

Shim must be placed between gear teeth of clutch housing.

13.

Insert a piece of shim stock (5) between snapring (3), PTO gear (1), and clutch housing (4).

14.

Repeat steps 12 and 13 for inserting remaining shim stock (5) approximately 5 in. (127 mm) apart.

NOTE

Use a wood block and steel hammer to help remove clutch housing

from PTO gear.

15.

Remove PTO gear (1), snapring (3), and shim stock (5) from clutch housing (4).

Change 1

0375 00-4