 |
|||
|
|
|||
|
Page Title:
TRANSMISSION OIL PUMP MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0374 00
TRANSMISSION OIL PUMP MAINTENANCE (Contd)
INSTALLATION
1. Calculate thickness of thrust washer (6):
a. Install spring compressor base on transmission (1) with two screws (3), and tighten down to
keep pressure on end shaft.
b. Position thrust washer selector gauge bar on transmission (1).
c. Install depth gauge so that stem passes through center hole of thrust washer selector gauge
bar and above thrust washer surface of forward clutch housing (2).
d. Measure distance from top of thrust washer gauge bar to thrust washer surface of forward
clutch housing (2). Subtract 1 in. (25.4 mm) of thrust washer selector gauge bar thickness and
record difference using table 1, Oil Pump Thrust Washer Selector.
Table 1. Oil Pump Thrust Washer Selector.
THRUST WASHER
MARKED
DIMENSION
6831620
0
0.732-0.749 in. (18.61-19.02 mm)
BLACK
6831621
1
0.749-0.765 in. (19.03-19.44 mm)
RED
6831622
2
0.765-0.782 in. (19.44-19.86 mm)
BLUE
6831623
3
0.782-0.798 in. (19.86-20.27 mm)
GREEN
6831624
4
0.798-0.814 in. (20.27-20.69 mm)
BLACK
6831625
5
0.814-0.831 in. (20.69-21.11 mm)
BLACK
1
DEPTH
GAUGE
THRUST WASHER
SELECTOR GAUGE BAR
2
SPRING
COMPRESSOR BASE
3
Change 1
0374 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version