TRANSMISSION CONTROL VALVE REPLACEMENT - continued

TM 9-2320-386-24-1-2

0371 00

TRANSMISSION CONTROL VALVE REPLACEMENT (Contd)

Install 1-2 relay valve (44), spring (43), and spacer (42) into bore (37). Compress spacer (42) and

install pin (6) through control valve body (7) and at outside end of spacer (42).

Install 2-3 relay valve (39), spring (40), and valve stop (41) into bore (38). Compress stop (41) and

install pin (6) through control valve body (7) and at outside end of stop (41).

10.

Install fourth clutch trimmer valve (30), plug (31), springs (32) and (33), and valve stop (34) into

bore (8).

11.

Install second clutch trimmer valve (21), plug (22), springs (23) and (24), and valve stop (25) into

bore (9).

12.

Install third clutch trimmer valve (12), plug (13), spring (14), and valve stop (15) into bore (10).

13.

Install first clutch trimmer valve (16), plug (17), springs (18) and (19), and valve stop (20) into

bore (11).

14.

Install stop (26), spring (27), and accumulator valve (28) into bore (29).

15.

Hold cover (35) against spring force on control valve body (7) and install with bolts (36). Tighten

bolts to 8-12 lb-ft (11-16 Nm).

16.

Install valve stop (2), spring (3), and priority valve (4) into control valve body (7).

Install separator plate (5) onto control valve body (7). Tighten bolts to 8-12 lb-ft (11-16 Nm).

17.

NOTE

Retain selector valve with a rubber band, tape, or soft wire to

prevent it from dropping out during handling.

18.

Install selector valve (1) into assembled control valve body (7).

19.

Install modulator valve body (WP 0372 00).

Change 1

0371 00-12