|
|
TM 9-2320-386-24-1-2
0361 00
PISTONS AND CONNECTING RODS MAINTENANCE (Contd)
3.
Push piston (11) into cylinder block (12) until connecting rod (5) seats on crankshaft (15).
4.
Install lower sleeve bearing (16) on cap (17).
5.
Apply lubricant to male threads of screws (13) and install cap (17) on connecting rod (5) and two
screws (13) with nuts (18). Tighten nuts (18) 35-45 lb-ft (48-61 Nm).
6.
Put an alignment mark on cap (17) and nuts (18). Tighten nuts (18) an additional 1/6 turn.
7.
Install cylinder head (WP 0302 00).
8.
Install piston cooling tube (WP 0362 00).
11
1
5
2
13
12
3
14
11
10
10
8
9
4
15
7
5
6
16
17
18
END OF WORK PACKAGE
0361 00-5/6 blank
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |