 |
|||
|
|
|||
|
Page Title:
CARGO BODY REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0353 00
CARGO BODY REPLACEMENT (Contd)
NOTE
Trailer receptacle must be positioned with key in receptacle
towards right side of vehicle.
10.
Route trailer receptacle (23) through cargo bed bracket (1) and align mounting holes.
NOTE
Waterproof cover must be positioned with hinge aligned with
trailer receptacle key.
11.
Install waterproof cover (22) and trailer receptacle (23) on rear cargo bed bracket (1) with two new
lockwashers (18) and (21), screws (19) and (20), clamp (7), and four new locknuts (8).
12.
If removed, install grommet (16) on frame rail (13).
NOTE
Route wiring harness through grommet in frame rails before
installing clamps.
13.
Install clamps (12) and (15) on frame rail (13) with screw (14) and new locknut (11).
14.
Install ground (GND) leads (4) and (5) on cargo bed bracket (1) with new lockwasher (3), screw (2),
new lockwasher (9), and new locknut (6).
15.
Connect leads 380A and 21 (10) to rear lights harness leads 380A and 21 (17).
16.
Install reflectors (TM 9-2320-361-20).
17.
Install cargo body upper and lower rear splash guards (M35A3C) (TM 9-2320-361-20).
18.
Install cargo body front splash guards (M35A3C, M36A3) (TM 9-2320-361-20).
19.
Install cargo body front rack (M35A3C, M36A3) (TM 9-2320-361-20).
20.
Install cargo body side racks and troop seat (M35A3C, M36A3) (TM 9-2320-361-20).
21.
Install clearance and rear side marker lights (WP 0111 00).
22.
Install backup lights (WP 0110 00).
23.
Install battery ground cable (WP 0121 00).
5
6
4
3
7
8
2
9
1
12
10
11
13
~
23
22
14
21
20
17
18
15
16
19
END OF WORK PACKAGE
0353 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version