 |
|||
|
|
|||
|
Page Title:
CARGO BODY REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0353 00
CARGO BODY REPLACEMENT (Contd)
NOTE
M35A3 front left side bracket mounting screws secure two sets of
springs positioned on top of body brackets. Right side spring sets
are the same and are secured below frame brackets.
5.
Install four screws (17), springs (18), and springs (15) on two brackets (2) and (16) with four
washers (14) and new locknuts (13).
6.
Adjust spring screws (17) to set height of springs (18) and (15) to 6.375 in. (16.19 cm).
7.
Install six screws (5) on brackets (3) and (6) with six washers (8) and new locknuts (7). Tighten
locknuts (7) 125-165 lb-ft (170-224 N.m).
NOTE
M36A3 long wheelbase models have two additional body and
frame brackets. Perform step 8 for hardware installation.
8.
Install four screws (9) on two brackets (4) and (10) with four washers (12) and new locknuts (11).
Tighten locknuts (11) 105-145 lb-ft (142-197 N.m).
9.
Remove lifting device, chains, and guide lines from cargo body (1).
0353 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version