|
|
TM 9-2320-386-24-1-2
0343 00
FRONT AXLE REPLACEMENT (Contd)
9.
Install flange (3) with propeller shaft (1) on front axle differential flange (4) with four screws (2)
and new locknuts (5). Tighten locknuts (5) 102-121 lb-ft (138-164 Nm).
10.
Install two clamps (11), brake line (10), new lockwasher (9), screw (8), washer (6), and nut (7) on axle
housing cover (12).
11.
Install two brackets (23) on axle housing (24) with two new assembled-washer bolts (22).
12.
Install two spring plates (19), new lockwashers (18), and nuts (17) on studs (27). Tighten nuts (17)
80-105 lb-ft (108-142 Nm).
13.
Connect two springs (20) to spring plates (19).
14.
Install two new washers (26), brake line assemblies (21), new washers (26), and brake line
screws (25) on backing plates (16). Tighten brake line screws (25) 65 lb-ft (88 Nm).
15.
Install air connectors (13) on fitting (14) at axle hub (15).
16.
Connect two CTIS connectors (28) on CTIS air line (29) to connectors (13) on axle hubs (15).
8
9
7
2
1
6
3
10
4
12
11
15
5
11
13
~
14
32
32
30
16
17
31
18
31
33
26
22
19 20
30
~
21
29
23
12
28
~
26
27
15
24
25
13
0343 00-10
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |