|
|
TM 9-2320-386-24-1-2
0343 00
FRONT AXLE REPLACEMENT (Contd)
INSTALLATION
WARNING
Axle is heavy. Ensure axle is secured with chains and personnel are
clear before lifting axle. Failure to do so may result in injury to
personnel.
NOTE
Two assistants will help with steps 1 through 3.
Position thicker end of lower spring seat toward front of vehicle.
1.
Using two hydraulic jacks, place axle assembly (8) under vehicle.
2.
Align spring seats (5) on axle assembly (8) under springs (1).
3.
Raise axle assembly (8) until holes in spring seats (5) meet spring centering bolts (9).
4.
Install four U-bolts (2) on two saddle plates (3).
NOTE
Install right clamping plate with steering assist cylinder
mounting facing rear of vehicle.
5.
Install two clamping plates (6) on axle assembly (8) with four U-bolts (2) and eight new
locknuts (7). Tighten locknuts (7) 190-230 lb-ft (258-312 Nm).
2
3
1
CHAINS
~
JACK STAND
FRONT OF
VEHICLE
9
4
5
~
HYDRAULIC
JACK
6
8
7
0343 00-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |