 |
|||
|
|
|||
|
Page Title:
AT545 TRANSMISSION FLEXPLATE AND HUB REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0337 01
TRANSMISSION FLEXPLATE AND HUB REPLACEMENT (Contd)
REMOVAL
1. Remove eight screws (8), plate (7), flexplate (5), hub (3), and flywheel (2) from crankshaft (1).
2. Remove hub (3) from flexplate (5).
3. Remove twelve screws (4) and flexplate (5) from attaching ring (6).
INSTALLATION
NOTE
If replacing AT1545P transmission with AT545 transmission,
discard parts of AT1545P transmission and use kit P/N 12448750.
1.
Apply adhesive to twelve screws (4), and install flexplate (5) on attaching ring (6) with screws (4).
Tighten screws (4) 36-43 lb-ft (49-58 Nm) in sequence shown.
2.
Install hub (3) on flexplate (5).
3.
Install flywheel (2), flexplate (5), hub (3), and plate (7) on crankshaft (1) with eight screws (8).
Tighten screws (8) 90-100 lb-ft (125-136 Nm) in sequence shown.
4.
Install adapter and transmission (WP 0336 00).
Change 1
0337 01-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version