TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued

TM 9-2320-386-24-1-2

0335 00

TRANSMISSION (IN-VEHICLE) REPLACEMENT (Contd)

34.

Install front propeller shaft (2) on flanges (1) of front axle differential (4) and transfer case (11)

with eight screws (5) and new locknuts (3).

35.

Install output flange (6) on transmission (13) with washer (7) and screw (8). Tighten screw (8)

102-121 lb-ft (138-164 Nm).

36.

Install propeller shaft (10) on input flange (12) of transfer case (11) and output flange (6) of

transmission (13) with eight screws (9). Tighten eight screws (9) 40-44 lb-ft (54-60 Nm).

37.

Install transmission oil dipstick (WP 0138 00).

38.

Remove and replace transmission external oil filter (WP 0142 00).

39.

Install cab tunnel and toeboard (WP 0207 00).

40.

Raise front windshield (TM 9-2320-386-10).

41.

Install transfer case shift lever and linkage (WP 0144 01).

42.

Install transmission shift tower (WP 0133 00).

43.

Fill transmission to proper level (WP 0023 00).

44.

Install companion seat and driver's seat (WP 0208 00).

45.

Install canvas or hardtop (TM 9-2320-386-10).

46.

Install battery ground cable (WP 0121 00).

47.

Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.

Check for leaks and road test vehicle.

Change 1

0335 00-18