 |
|||
|
|
|||
|
Page Title:
TRANSMISSION AND CONTAINER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0334 00
TRANSMISSION AND CONTAINER REPLACEMENT (Contd)
INSTALLATION
1.
Install rear mount (5) on transmission (1) with four screws (6).
2.
Apply sealing compound to four screws (3).
3.
Install two front mounts (2) on transmission (1) with four new lockwashers (4) and screws (3).
4.
Wrap lifting strap around output housing of transmission (1) and two retaining brackets (8).
5.
Install lifting strap on lifting device.
WARNING
All personnel must stand clear during lifting operations. A
swinging or shifting load may cause injury to personnel.
6.
Raise transmission (1) and position over cradle (18) on lower container section (15).
7.
Align holes of front (2) and rear (5) mounting with holes in cradle (18) then lower transmission (1)
on cradle (18).
8.
Remove lifting strap from transmission (1).
9.
Install two washers (13), screws (14), new lockwashers (12), and nuts (11) on rear mount (5) and
cradle (18).
10.
Install four washers (16), screws (17), washers (19), new lockwashers (20), and nuts (7) on two front
mounts (2) and cradle (18).
11.
Install oil dipstick tube with dipstick (10) on transmission (1) with two new tiedown straps (9).
12.
Position new gasket (22) on lower container section (15).
WARNING
All personnel must stand clear during lifting operations. A
swinging or shifting load may cause injury to personnel.
13.
Install chains and lifting device on upper container section (21).
14.
Install upper container section (21) on lower container section (15) with eighteen washers (24),
screws (25), and nuts (23).
0334 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version