 |
|||
|
|
|||
|
Page Title:
FRONT WIRING HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0330 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
88.
Connect cannon plug (2) to turn signal hand control (1).
89.
Install bracket (3) on instrument panel (5) with two screws (4) and nuts (11).
90.
Position clamp (9) around steering column (12) and wiring harness (8) and install clamp (9) with
screw (10) and nut (6).
91.
Install new tiedown straps (7), as necessary, to remove slack.
92.
Route wiring harness (23) through grommet (22) in base plate of shifter housing (21).
93.
Connect lead 40 (17) to shifter lead (16).
94.
Install new lockwasher (18), ground (GND) lead 99A (20), and screw (19) on bracket (24) with new
plain-assembled nut (15).
95.
Install two side panels (14) on shifter housing (21) with twelve screws (13).
96.
Connect lead 118 (26) to parking brake switch lead (25).
97.
Connect lead 324 (28) to transmission oil pressure sensor (27).
98.
Connect plug with leads 380 and 380A (29) to backup light switch (30).
14 13
17
16
14
15
1
13
12
11
18
10
~
19
9
20
2
3
5
~
6
8
4
21
23
7
22
24
28
27
26
25
30
29
0330 00-32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version