FRONT WIRING HARNESS REPLACEMENT - continued

TM 9-2320-386-24-1-2

0330 00

FRONT WIRING HARNESS REPLACEMENT (Contd)

INSTALLATION

NOTE

If new wiring harness is to be installed, transfer tags installed at

removal on old harness to new harness.

If wiring harness requires repair, refer to WP 0125 00 for further

instructions.

Position front wiring harness in vehicle.

NOTE

As front wiring harness is installed, install clamps on tagged

locations, then perform installation as specified for each location.

Wiring harness is engineered for each vehicle configuration.

Adjust wiring harness to remove slack or allow slack as required

for proper installation.

Route wiring harness (1) into vehicle cab (2) through firewall (3).

0330 00-18