|
|
TM 9-2320-386-24-1-2
0330 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
35.
Loosen two clamps (2), remove exhaust flex elbow (1) with gaskets (4) and (5) from turbocharger (3)
and inlet on exhaust pipe (6). Discard gaskets (4) and (5).
36.
Remove locknut (25), clamp (24) with wiring harness (15), ground (GND) lead (26), screw (28), and
two lockwashers (27) from frame rail (29). Discard locknut (25) and lockwashers (27).
37.
Remove locknut (23), clamp (22) with wiring harness (15), and screw (21) from support rail (30).
Discard locknut (23).
38.
Remove nut (31), clamp (32) with leads 10 and 14 (35), wire 214 (36), screw (16), lockwasher (17),
and ground (GND) lead 99A (18) from starter relay mounting plate (19). Discard lockwasher (17).
39.
Remove nut (33), washer (34), and leads 10 and 14 (35) from starter relay terminal post (20).
40.
Remove nut (10), washer (9), and lead 74B (8) from starter relay terminal post (7).
41.
Remove locknut (14), screw (11), and clamp (12) with wiring harness (15) from firewall (13).
Discard locknut (14).
13
9
12
11
10
14
~
8
7
15
2
1
16
36
17
2
35
18
34
19
~
33
20
~
32
~
21
4
22
31
6
30
3
5
28
29
23
~
15
27
24
26
25
0330 00-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |