|
|
TM 9-2320-386-24-1-2
0330 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
NOTE
All waterproofing must be removed from wires.
Vehicles may come equipped with a Leece-Neville or Prestolite
alternator. The wiring harness leads are connected to negative
and positive posts on either alternator.
21.
Disconnect lead 1 (21) from Y-connector (20).
NOTE
Perform steps 22 and 23 for Prestolite alternators only.
Perform step 24 for Leece-Neville alternators only.
22.
Remove two screws (3), lockwashers (2), and plate (1) from alternator (10). Discard lockwashers (2).
23.
Remove two assembled-washer screws (6) and cover plate (5) from alternator (10). Discard
assembled-washer screws (6).
24.
Remove two screws (6), lockwashers (22), and cover plate (5) from alternator (10). Discard
lockwashers (22).
25.
Remove nut (7), lockwasher (8), and positive lead 2 and STE/ICE-R lead 770-N (4) from alternator
terminal post (9). Discard lockwasher (8).
26.
Remove nut (15), screw (11), two lockwashers (12), and ground (GND) leads (13) from frame
rail (14). Discard lockwashers (12).
27.
Remove locknut (17), clamp (16), and screw (18) from frame rail (14) and cable (19). Discard locknut (17).
28.
Remove nut (26), lockwasher (25), and positive cable lead, harness lead, and relay lead 14 (24) from
starter solenoid terminal (23). Discard lockwasher (25).
8
7
6
4
3
6
22
5
5
2
4
21
7
1
8
20
9
10
11
12
10
13
9
LEECE-NEVILLE
20
~
25
18
24
21
14
23
12
26
15
16
17
19
PRESTOLITE
0330 00-6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |