 |
|||
|
|
|||
|
Page Title:
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
INSTALLATION
1.
Install chain on lifting brackets (3) and (7) and attach chain to lifting device.
2.
Position new gasket (5) on cylinder block (6).
CAUTION
Ensure cylinder head is lowered straight down and positioned
correctly on cylinder block and guide dowels to prevent damage.
3.
Install cylinder head (4) on cylinder block (6) and remove lifting device and chain from lifting
brackets (3) and (7).
4.
Apply antiseize compound to threads of screws (1) and (2).
5.
Install six screws (2), fourteen washers (8), and screws (1) on cylinder head (4) and cylinder
block (6).
Tighten screws (1) 99-121 lb-ft (134-164 Nm) in sequence shown.
6.
7.
Tighten screws (1) 305 lb-ft (414 Nm) in sequence shown.
Tighten screws (1) 335 lb-ft (455 Nm) in sequence shown.
8.
9.
Tighten screws (2) 36-46 lb-ft (49-62 Nm) in sequence shown.
10.
Remove lifting screws and lifting bracket (3) from cylinder head (4).
2
LIFTING
4
1
DEVICE
CHAIN
20
18
16
15
17
19
1
13
9
5
1
3
7
11
2
3
8
14
10
6
2
4
8
12
TORQUE SEQUENCE
4
7
3
5
4
6
LIFTING
SCREWS
6
0302 00-20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version