 |
|||
|
|
|||
|
Page Title:
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
61.
Remove nut (8), washer (9), and bracket (1) with accelerator cable (2) and throttle control cable (3)
attached, from throttle lever (10).
62.
Remove two screws (6), washers (5), and bracket (4) with accelerator cable (2) and throttle control
cable (3) attached, from governor (7).
63.
Loosen nuts (12) and (14), and remove fuel line (13) with O-rings (11) and (15) from adapter (17) on
governor (7) and tee fitting (16). Discard O-rings (11) and (15).
CAUTION
Use care when sliding sleeve into cylinder head. A nick or
scratched sleeve will cut O-ring in cylinder head and cause an oil
leak.
64.
Remove clip (18) from sleeve (19).
65.
Using soft-jawed pliers, slide sleeve (19) into cylinder head (23).
66.
Remove retaining ring (24) and retainer pin (20) from clevis (22) and link pin (21). Discard retaining
ring (24).
2
3
1
4
5
6
10
9
8
7
12
13
18
11
~
17
24
7
19
23
14
20
15
22 21
16
0302 00-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version