 |
|||
|
|
|||
|
Page Title:
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
45.
Disconnect tubes (5) and (2) from connector (4) and elbow (3).
46.
Remove three screws (6), clamps (7), personnel heater tube (5), and heater hose (8) from engine (1).
47.
Remove screw (15), washer (14), and mounting bracket (16) from water regulator housing (9).
48.
Loosen clamp (11) on water regulator housing (9) and hose (12).
49.
Remove two screws (13), water regulator housing (9), and gasket (10) from hose (11) and engine (1).
Discard gasket (10).
50.
Remove two nuts (18), screw (22), clamp (19), clamp (23), flexpipe (17), and two gaskets (21) from
turbocharger (20) and elbow pipe (24). Discard gaskets (21).
51.
Disconnect oil inlet tube (26) from elbow (28).
52.
Remove two screws (25), washers (33), oil inlet tube (26), gasket (32), and O-ring (27) from turbo-
charger (20) and elbow (28). Discard gasket (32) and O-ring (27).
53.
Remove elbow (28) and O-ring (29) from adapter (30) on oil cooler (31). Discard O-ring (29).
1
1
2
7
3
9
10
7
16
6
8
11
13
14
4
6
15
12
5
25
19
18
33
26
27
17
32
28
21
29
~
24
30
21
31
18
20
23
20
22
0302 00-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version