 |
|||
|
|
|||
|
Page Title:
ENGINE AND CONTAINER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0296 00
ENGINE AND CONTAINER REPLACEMENT (Contd)
REMOVAL
WARNING
All personnel must stand clear during lifting operations. A
snapped chain or shifting or swinging load may cause injury to
personnel.
Engine container is pressurized. Ensure pressure is released
before opening container. Failure to do so may result in injury to
personnel.
NOTE
For depressurizing of engine container, follow instructions
provided with container.
1.
Remove twenty-four nuts (5), lockwashers (6), screws (1), and washers (7) from upper (2) and
lower (4) container sections. Discard lockwashers (6).
2.
Install lifting chains and lifting device to upper container section (2).
Remove upper container section (2) and gasket (3) from lower container section (4). Discard gasket (3).
3.
4.
Remove four nuts (9), lockwashers (10), and screws (12) from two rear mounts (11) and cradle (13).
Discard lockwashers (10).
Remove screw (14) and washers (15) and (16) from front engine mount bracket (17) and cradle (13).
5.
6.
Install chain on two lifting brackets (8) and attach to lifting device.
WARNING
All personnel must stand clear during lifting operations. A
swinging or shifting load may cause injury to personnel.
Lifting device must have a weight capacity greater than 4,500 lbs
(2043 kg). Failure to do so may cause injury to personnel and/or
damage to equipment.
NOTE
Assistant will help with steps 7 and 8.
7.
Raise engine (18) from cradle (13) and lower container section (4).
8.
Lower engine (18) on support stands and remove lifting device and chain from lifting brackets (8).
9.
Remove eight screws (20), lockwashers (19), and two rear mounts (11) from engine (18). Discard
lockwashers (19).
0296 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version