 |
|||
|
|
|||
|
Page Title:
POWER PLANT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0295 00
POWER PLANT REPLACEMENT (Contd)
30.
Install clamp (1) with harnesses (16) and (17) on stud (5) with new locknut (15).
NOTE
Perform step 31 for vehicles with serial numbers up to 504923
only.
31.
Install quick-start bracket (4), new lockwasher (7), and ground strap (12) on engine (18) with four
new lockwashers (3) and screws (2).
32.
Connect magnetic speed sensor lead (13) on flywheel housing (6) to plug with leads 429
and 428 (14).
33.
Install vent tube (9) to elbow (11) on transmission (8) and tighten nut (10).
34.
Apply sealing compound to threads of eight screws (21) and install propeller shaft (20) on
flanges (19) and (22) at transmission (8) and transfer case (23) with eight screws (21). Tighten
screws (21) 40-44 lb-ft (54-60 Nm).
3
2
4
5
1
18
17
6
7
8
16
15
14
13
12
11
9
10
0295 00-26
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version