 |
|||
|
|
|||
|
Page Title:
SPEEDOMETER DRIVESHAFT ADAPTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0287 00
SPEEDOMETER DRIVESHAFT ADAPTER REPLACEMENT (Contd)
REMOVAL
1.
Remove
speedometer driveshaft (7) from driveshaft adapter (8).
2.
Remove
signal generator (1) from driveshaft adapter (8).
3.
Remove
sleeve and seal assembly (3) from driveshaft adapter (8).
4.
Remove
sleeve and seal assembly (3) from port (6) on transfer case (5).
5.
Remove
drive adapter (4) from sleeve and seal assembly (3).
6.
Remove
lube fitting (2) from driveshaft adapter (8).
INSTALLATION
1.
Apply sealant to male threads of lube fitting (2).
2.
Install lube fitting (2) on driveshaft adapter (8).
3.
Install drive adapter (4) in sleeve and seal assembly (3)
4.
Install sleeve and seal assembly (3) in port (6) on transfer case (5).
5.
Install driveshaft adapter (8) to sleeve and seal assembly (3).
6.
Install signal generator (1) on driveshaft adapter (8).
7.
Install speedometer driveshaft (7) to driveshaft adapter (8).
8.
Lubricate fitting (WP 0023 00).
9.
Connect battery ground cable (WP 0121 00).
1
2
4
3
5
8
7
6
END OF WORK PACKAGE
0287 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version