 |
|||
|
|
|||
|
Page Title:
100-AMP ALTERNATOR REGULATOR REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0279 00
100-AMP ALTERNATOR REGULATOR REPLACEMENT (Contd)
REMOVAL
1.
Disconnect cable (2) and harness (1) from regulator (3).
2.
Remove four nuts (15), lockwashers (14), and regulator (3) from four shock mounts (12). Discard
lockwashers (14).
3.
Remove four screws (16), lockwashers (17), and two frame reinforcements (4) from regulator (3).
Discard lockwashers (17).
NOTE
Assistant will help with step 4.
4.
Remove four locknuts (9), lockwashers (8), screws (5), and two brackets (6) from fender (7). Discard
locknuts (9) and lockwashers (8).
5.
Remove four nuts (10), lockwashers (11), shock mounts (12), and ground straps (13) from two
brackets (6). Discard lockwashers (11).
INSTALLATION
1.
Install four ground straps (13) and shock mounts (12) on two brackets (6) with four new
lockwashers (11) and nuts (10).
NOTE
Assistant will help with step 2.
2.
Install two brackets (6) on fender (7) with four screws (5), new lockwashers (8), and new
locknuts (9).
3.
Install two frame reinforcements (4) on regulator (3) with four new lockwashers (17) and
screws (16).
4.
Install regulator (3) on four shock mounts (12) with four new lockwashers (14) and nuts (15).
5.
Connect cable (2) and harness (1) to regulator (3).
6.
Connect battery ground cable (WP 0121 00).
0279 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version