 |
|||
|
|
|||
|
Page Title:
AIR BRAKE ELECTRICAL HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0274 00
AIR BRAKE ELECTRICAL HARNESS REPLACEMENT (Contd)
REMOVAL
1.
Remove three tiedown straps (6) from air brake electrical harness (2) and main harness (7). Discard
tiedown straps (6).
2.
Disconnect two leads 75 (5) from pressure switch (4) on crossmember (3).
3.
Disconnect two leads 75 (11) from booster stoplight switch (12).
4.
Disconnect two leads 75 (10) from terminal plugs (9) on main harness (7).
5.
Remove air brake electrical harness (2) from frame rail (1) and crossmember (8).
INSTALLATION
1.
Install air brake electrical harness (2) on main harness (7) on frame rail (1) and crossmember (8)
with three new tiedown straps (6).
2.
Connect two leads 75 (10) to terminal plugs (9) on main harness (7).
3.
Connect two leads 75 (11) on booster stoplight switch (12).
4.
Connect two leads 75 (5) on pressure switch (4) on crossmember (3).
5.
Connect battery ground (GND) cable (WP 0121 00).
0274 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version