 |
|||
|
|
|||
|
Page Title:
CHEMICAL AGENT ALARM MOUNTING KIT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0271 00
CHEMICAL AGENT ALARM MOUNTING KIT REPLACEMENT (Contd)
INSTALLATION
NOTE
Assistant will help with steps 1 through 5.
1.
Install alarm unit bracket (5) on rear cab panel (1) with two screws (13) and new locknuts (21).
2.
Insert harness (2) in grommet (19) and install grommet (19) in cab floor hole (18).
3.
Install harness (2) on frame (17) with two clamps (16) and screws (15).
4.
Install harness (2) on main wiring harness (8) with four new tiedown straps (9).
5.
Install harness (2) on firewall (7) with clamp (10), screw (11), and new locknut (12).
6.
Install harness (2) on rear cab panel (1) with clamp (20) and screw (14).
7.
Install harness (2) on alarm unit bracket (5) with two clamps (4), screws (3), and new locknuts (6).
8.
Install new lockwasher (36), ground (GND) terminal (37), and harness ground (GND) wire (42) on
right side of turn signal flasher box (33) with screw (43), new lockwasher (35), and new
locknut (34).
9.
Connect lead 25 (45) to connector (44).
10.
Connect leads 25 (38), 25 (40), and 25 (41) to connector (39).
11.
Install harness (2) on left front fender (28) with clamp (32), screw (46), and new locknut (31).
12.
Install detector unit bracket (25), support (29), and harness (2) on left front fender (28) with two
screws (22) and (26), clamp (27), and four new locknuts (30).
13.
Install harness receptacle (47) on bracket (23) with nut (24).
14.
Install M43 detector and M42 alarm unit (TM 3-6665-225-12).
22
25
23 24
3
3
47
4
26
1
46
5
2
6
27
21
7
45
8
2
20
43 44
~
42
28
6
41
29
40
19
31
30
9
10
32
39
18
2
13
37
16
38
11
12
33
15
36
35
14
15
17
16
34
END OF WORK PACKAGE
0271 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version