 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER WATER HOSES REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0261 00
SWINGFIRE HEATER WATER HOSES REPLACEMENT (Contd)
REMOVAL
1.
Remove clamps (3) and (7), outlet hose (2), and inlet hose (1) from inlet port (4) and outlet port (6)
on water jacket (5).
2.
Remove clamp (19) and outlet hose (1) from adapter (18).
3.
Remove two locknuts (21), screws (23), clamps (20), and outlet hose (1) from fender (22). Discard
locknuts (21).
4.
Remove clamp (8) and inlet hose (2) from adapter (9).
5.
Remove adapter (9) from elbow (10).
6.
Loosen jamnut (11) and remove elbow (10) and O-ring (12) from engine (13). Discard O-ring (12).
7.
Remove adapter (18) from fitting (17).
8.
Loosen jamnut (16) and remove fitting (17) and O-ring (15) from water pump housing (14). Discard
O-ring (15).
INSTALLATION
1.
Apply sealant to male threads of adapters (9) and (18).
2.
Install new O-ring (15) and fitting (17) on water pump housing (14) and tighten jamnut (16).
3.
Install adapter (18) on fitting (17).
4.
Install new O-ring (12) and elbow (10) on engine (13) and tighten jamnut (11).
5.
Install adapter (9) on elbow (10).
6.
Install inlet hose (2) on adapter (9) with clamp (8).
7.
Install outlet hose (1) on adapter (18) with clamp (19).
8.
Install outlet hose (1) and two clamps (20) on fender (22) with two screws (23) and new
locknuts (21).
9.
Install outlet hose (1) on outlet port (6) on water jacket (5) with clamp (7).
10.
Install inlet hose (2) on inlet port (4) on water jacket (5) with clamp (3).
11.
Fill cooling system to proper level (WP 0068 00).
0261 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version