 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER BATTERY BOX HEATER TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0259 00
SWINGFIRE HEATER BATTERY BOX HEATER TUBE REPLACEMENT (Contd)
REMOVAL
1.
Remove two nuts (11), lockwashers (10), screws (7), clamp (9), and exhaust tube (8) from exhaust
elbow (16). Discard lockwashers (10).
2.
Remove four locknuts (13) and screws (15) from battery support plate (2) and running board
supports (6) and (14). Discard locknuts (13).
3.
Remove pan assembly (1), with insulation (3), and battery support plate (2) from baffle plate (5).
4.
Remove six locknuts (12), screws (4), and baffle plate (5) from running board supports (6) and (14).
Discard locknuts (12).
INSTALLATION
1.
Install baffle plate (5) on running board supports (6) and (14) with six screws (4) and new
locknuts (12).
2.
Install pan assembly (1), with insulation (3), and battery support plate (2) on baffle plate (5).
3.
Install battery support plate (2) on running board supports (6) and (14) with four screws (15) and
new locknuts (13).
4.
Install exhaust tube (8) and clamp (9) on exhaust elbow (16) with two screws (7), new lock-
washers (10), and nuts (11).
5.
Install STE/ICE-R shunt (WP 0124 00).
6.
Install battery box (WP 0123 00).
0259 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version