 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER AND MOUNTING BRACKETS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0258 00
SWINGFIRE HEATER AND MOUNTING BRACKETS REPLACEMENT (Contd)
REMOVAL
1.
Unlock clamp handle (3) from clip (9) and remove clamp (2) and swingfire heater (1) from stowage
brackets (14) and (5).
2.
Remove four locknuts (11), lockwashers (10), screw (13), three screws (6), and stowage bracket (14)
from floor (12). Discard lockwashers (10) and locknuts (11).
3.
Remove two locknuts (8), lockwashers (7), screws (4), and stowage bracket (5) from floor (12).
Discard locknuts (8) and lockwashers (7).
4.
Unlock clips (17) and (20), open clamps (16) and (19), and remove swingfire barrel (15) from
stowage brackets (18) and (23).
5.
Remove eight locknuts (22), lockwashers (21), screws (24), and stowage brackets (18) and (23) from
floor (12). Discard locknuts (22) and lockwashers (21).
INSTALLATION
1.
Install stowage brackets (23) and (18) on floor (12) with eight screws (24), new lockwashers (21),
and new locknuts (22).
2.
Install swingfire barrel (15) on stowage brackets (18) and (23) with clamps (16) and (19) and lock
clips (17) and (20).
3.
Install stowage bracket (5) on floor (12) with two screws (4), new lockwashers (7), and new
locknuts (8).
4.
Install stowage bracket (14) on floor (12) with screw (13), three screws (6), four new lock-
washers (10), and new locknuts (11).
5.
Install swingfire heater (1) on stowage brackets (14) and (5) with clamp (2) and lock clamp
handle (3) to clip (9).
6.
Install companion seat (WP 0257 00).
0258 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version