 |
|||
|
|
|||
|
Page Title:
OIL PAN SHROUD AND EXHAUST TUBE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0252 00
OIL PAN SHROUD AND EXHAUST TUBE REPLACEMENT (Contd)
REMOVAL
.WARNING.
Do not touch hot exhaust system components with bare hands.
Injury to personnel may result.
1.
Remove cotter pin (9) and exhaust tube (10) from oil pan shroud (6). Discard cotter pin (9).
2.
Remove two cotter pins (12), elbow (13), and exhaust tube (10) from heater (14). Discard cotter
pins (12).
3.
Remove locknut (1), screw (3), clamp (2), and exhaust tube (10) from splash shield (4). Discard
locknut (1).
4.
Remove exhaust tube (10) from vehicle.
5.
Remove four screws (8), lockwashers (7), and oil pan shroud (6) from engine oil pan (5). Discard
lockwashers (7).
INSTALLATION
1. Install oil pan shroud (6) on engine oil pan (5) with four new lockwashers (7) and screws (8).
2. Install exhaust tube (10) on oil pan shroud (6) with new cotter pin (9).
3. Insert exhaust tube (10) through hole (11) in toolbox (15).
4. Install elbow (13) and exhaust tube (10) on heater (14) with two new cotter pins (12).
5. Install exhaust tube (10) on splash shield (4) with clamp (2), screw (3), and new locknut (1).
0252 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version