 |
|||
|
|
|||
|
Page Title:
PERSONNEL HOT WATER HEATER MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0239 00
PERSONNEL HOT WATER HEATER MAINTENANCE (Contd)
INSTALLATION
1.
Install mounting brackets (10), (20), (22), and (26) on hot water heater (21) with four washers (11)
and screws (12).
2.
Install silicone rubber adhesive to mounting surface of heater air intake adapter (23) and surface of
heater fan motor housing (14) and install heater air intake adapter (23) on heater fan motor
housing (14) with two screws (24).
3.
Install adapter (27) on hot water heater (21) with four new lockwashers (28) and screws (29).
4.
Install hot water heater (21) and mounting bracket (26) on instrument panel (34) with screw (33)
and new locknut (25).
5.
Install water supply hose (7) and water return hose (8) on hot water heater (21) and tighten two
clamps (9).
6.
Install mounting bracket (22) on insert (3) with screw (30).
7.
Install mounting bracket (10) on support bracket (6) with screw (5).
8.
Install mounting bracket (20) on support bracket (6) with screw (4).
9.
Install hot air duct (32) on adapter (27) and tighten clamp (31).
10.
Install nut (19), GND terminal (16), new lockwasher (17), and nut (18) on heater fan motor
housing (14).
11.
Connect lead 400A (13) to hot water heater fan motor plug (15).
12.
Install glove box (1) on instrument panel (34) with ten screws (2).
13.
Fill cooling system (WP 0068 00).
14.
Connect battery ground cable (WP 0121 00).
0239 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version