 |
|||
|
|
|||
|
Page Title:
BRUSHGUARD STRUT RODS AND MOUNTING BRACKETS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0229 00
BRUSHGUARD STRUT RODS AND MOUNTING BRACKETS REPLACEMENT (Contd)
NOTE
Right and left brushguard strut rods and mounting brackets are replaced
the same. This task covers the left brushguard strut rod.
REMOVAL
1.
Remove two cotter pins (6), retaining pins (2), and strut rod (3) from mounting bracket (5) and
brushguard (1). Discard cotter pins (6).
2.
Remove clevis (4) from strut rod (3).
3.
Remove locknut (9), screw (7), and mounting bracket (5) from fender (8). Discard locknut (9).
INSTALLATION
1.
Install mounting bracket (5) on fender (8) with screw (7) and new locknut (9).
2.
Install clevis (4) on strut rod (3).
NOTE
Length of strut rod and angle of clevis can be adjusted by turning strut rod
clevis clockwise or counterclockwise.
3.
Install strut rod (3) on brushguard (1) and mounting bracket (5) with two retaining pins (2) and
new cotter pins (6).
0229 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version